LABEL & MARK INDUSTRIES COMPANY LK-320 Скачать руководство пользователя страница 7

Страница: 7 / 52

USER’S MANUAL OF LK-320

LABEL & MARK INDUSTRIES COMPANY

11) For the benefit of safety, when the “protective cover” is opened the printer

will not work. Therefore, put on the protective cover when printing. During
opening the “protective cover”, do not let any object touch the moving
parts of the printer.

12) In order to avoid getting electric shock, do not plug or unplug any

connections with a wet hand.

13) Do not use AC power supply exceeding 110V—240V in voltage.
14) Keep the tube printer away from alcohol, gasoline and other volatile

solvents; keep it away from fire to avoid explosion or burning.

15) Clean the printer with a wrung wet cotton cloth. Use of organic and

flammable solvent is prohibited.

16) In case of strange odor or noises during operation, switch off the printer

immediately and disconnect the power supply and then contact your sale
agent.

17) Stop the printer immediately if any foreign matter is introduced inside the

printer in order to avoid damaging it.

18) This printer prints only on sleeve tubes or heat shrink tubes with

≦

5.0mm. Printing on tubes

>5.0mm may damage the printer.

Содержание LK-320





















































Результаты поиска

Содержание LK-320

Отзывы:

Похожие инструкции для LK-320

Бренды по названию

Популярные бренды

LABEL & MARK INDUSTRIES COMPANY LK-320, Руководство пользователя

Результаты поиска

Содержание LK-320

Отзывы:

Похожие инструкции для LK-320

Бренды по названию

Популярные бренды