Chapter 4: High Performance Features and Safety Precautions
Product Service 1-800-522-7658
23
10.
Electrical Pass through Iris
allows electrical cords and data cords to pass
through the back of enclosure without leaving a large hole for contaminants
to escape. The unit ships with solid plugs and the iris plugs are included
with the instruction manual for your convenience.
11.
Shipped fully assembled
to eliminate the need for costly onsite assembly.
Accessories such as the exhaust transition connections, work surfaces,
airflow monitors and fluorescent light kits are easily installed.
12.
Accessory Exhaust Connections
. The XPert/XVS enclosures feature two
exhaust locations: One is located on the top of the rear plenum and the
other is located on the bottom of the rear plenum. Exhaust transition
connectors are available for either a 6" OD outside exhaust or a 5" ID hose;
5', 6' and 8' enclosures have multiple exhaust connections. All exhaust
transition connectors are reviewed in Chapters 2 and 3 and accessories
displayed for order in Chapter 7.
13.
Accessory Guardian™ Airflow Monitors
continuously monitor airflow.
An audio/visual alarm alerts the user to low airflow conditions. The
Guardian™ Digital Airflow Monitor also displays a face velocity value,
provides an RS232 output, a night setback mode and several auxiliary relay
ports. See Chapter 7 for ordering information. See Chapter 6 for detailed
information, installation, and calibration.
14.
Accessory Fluorescent Light Kits
provide excellent illumination with an
auxiliary outlet plug for supplying power to auxiliary equipment such as a
balance or printer. See Chapter 7 for ordering information.
15.
Accessory Roof-Mounted Blower
sized to provide adequate airflow to
XPert/XVS enclosures when used with an exhaust damper. See Chapters 2,
3 and 7.
16.
Accessory FilterMate Portable Exhauster
provides up to 280 cfm for
HEPA filtration or up to 220 cfm for combination HEPA/Carbon filtration
when connected to XPert/XVS enclosures. Multiple FilterMates must be
balanced and can be used on 5', 6' and 8' units with multiple exhaust
connections. See Chapters 2, 3 and 7.
