Chapter 4: Lyo-Works Operating System
Product Service 816-333-8811 or 1-800-522-7658
19
Original instructions
Main Menu Icons
Menu icons are displayed across the top of the screen. Their descriptions from left
to right are as follows:
1.
Home
2.
Programs
3.
Data Logging
4.
Settings
5.
Sensors
6.
Drying Accessory
7.
End Point Detection
8.
Help
Moving Between Menu Screens
You can move between menu screens by either touching the menu icons or
swiping across the screen from left to right or right to left.
The Following system parameters are displayed in the center portion of the screen:
Function Indicator Bar
A thin blue indicator bar will appear under the icon of the menu screen that is
currently being displayed. The same type of indicator bar will appear above the
operation buttons to signify if each function is ON or OFF.
System Parameters Display
Line 1
COLLECTOR & VACUUM HEADING –
Describes the measurement
that is displayed directly below the text.
Line 2
COLLECTOR MEASUREMENT-
Displays the temperature of the
collector coil in °C or °F (as selected in Settings). The value displayed
will be
RED
if the temperature is:
> -40° C (for -50C models)
> -60° C (for -84C models)
> -75° C (for -105C models)
The value displayed will be
GREEN
if the temperature is:
≤ -40° C (for -50C models)
≤ -60° C (for -84C models)
≤ -75° C (for -105C models)
VACUUM MEASUREMENT–
Displays the Freeze Dryer vacuum level
in mbar, Pa, or Torr (as selected in Settings). The display will read “High”
if the vacuum level is > 5 mbar. If the vacuum level is ≤ 5 mbar, a
numerical value will be displayed. The value displayed will be
RED
if the
