LabCo 550.001.200, Руководство пользователя

Страница: 3 / 8

2
INTRODUCTION
Welcome to the Pipette filler User Manual. Users should read this manual carefully. The filler may be used with glass or
plastic pipettes to facilitate the pipetting of a wide range of liquids. Pipettes within the volume range of 0.1ml to 100ml can
be used. If the instrument is correctly used, the liquid comes into contact with the pipette only.
WARRANTY
This controller has 12 months warranty. When returning filler for repair, please ensure the instrument has been cleaned and
decontaminated before sending back.
DELIVERY
This unit is supplied with one pipette filler, 3um filter and a user manual.
Components
PIPETTING
1. Fit the pipette
Carefully attach the pipette by inserting it into the silicone adaptor inside the nose cone. Do not use force.
2. Fill the Pipette
Press the suction bellows first whilst holding the filler in a vertical position with the pipette tip down. Place the tip of the
pipette into the liquid to be aspirated. Press the aspirator lever slowly upwards allowing the liquid to fill the pipette so that
the meniscus is slightly above the required mark.
Nose
cone
Filter
Locking ring
Suction bellows
Silicone
adapter
Aspirate & dispense lever
Blow-out bellows