Lab Unlimited GF500, Руководство по эксплуатации

Страница: 6 / 20

6 GF500 Flowmeter
Repairing or Modifying a GF500 Gas Flowmeter
Never attempt to repair or modify a GF500 Gas Flowmeter
yourself. Disassembling a GF500 Gas Flowmeter may cause
damage that is not covered under the warranty. The GF500
Gas Flowmeter does not contain any user-serviceable parts.
Service should only be provided by Lab Unlimited or an Lab
Unlimited authorised distributor.
Flowmeter Inlet and Outlet pipes
Excessive force should not be applied to the inlet or outlet
pipes as this could cause them to become disconnected from
the flow sensor. Damage of this type is not covered under
warranty.
Flow Sensor
Do not blow into the GF500 Gas Flowmeter this can damage
the flow sensor and alter the calibration. Damage to flow
sensors caused by this are not covered under warranty.
Battery Replacement
The rechargeable battery in a GF500 Gas Flowmeter should be
replaced only by Lab Unlimited.
Charging the GF500 Gas Flowmeter
The flowmeter should only be charged with a rating of 5 V 300
mA DC max.
Storing the GF500 Gas Flowmeter
Store the GF500 Gas Flowmeter in a place where the
environment is non-condensing and the temperature is
between -20° and 45°C (-4° to 113°F).