Lab-T SLX-GO, Руководство пользователя, Страница: 15 / 26

SLX-Sensor Connecting
14
SLX Sensor comes paired with Hybrid Unit, however if a new connection is needed or
replacement Nano Senor required, they can be paired as follows:
(Simulator Upgrade Pack Only)
Please update the SLX-MICROSIM firmware 0.5.5 /SLX-HYBRID firmware to 0.6.5 or higher.
Turn off the power of NANO and check that the BLE icon on HYBRID is turned off.
The two devices can be connected as shown below.
MICROSIM must be in a state where Bluetooth is not connected to any app.
Once connected, if two devices are nearby, they will automatically connect.
When using MICROSIM alone, you can use it by automatically connecting
it to a PC or phone after the hybrid power is turned off.
Microsim Connected
(White blink)
POCKET
BLE ICON ON
Microsim Pairing mode
(White + White Blink LED)
5 Sec press
SLX-MICROSIM – Radar Model NEW Connection
Press the minus button of Radar and Nano together for 5 seconds to try pairing between new devices.
The icon blinks for LCD, and Double blinks for Nano.
NANO – Radar Model NEW Connection
5 Sec press
LCD Model Only
Double blinks
5 Sec press 5 Sec press
SLX-GO USER MANUAL