Labsystems VP600S Specifications
PREAMPLIFIER SECTION:
LOW NOISE 12AX7 TWIN TRIODE VALVE
EQUALISATION:
4 BAND VALVE PLUS UNIQUE MID IMAGE CIRCUITRY
D.I. OUTPUT:
SOLID STATE 600 OHM FULLY BALANCED XLR CONNECTOR
POST EQUALISATION OUTPUT @ MICROPHONE LEVEL
EFFECTS LOOP:
SOLID STATE MONO WITH OVER VOLTAGE PROTECTION.
CONNECTION VIA 2 X 6.3MM MONO JACK SOCKETS
SPEAKER OUTPUTS:
2 X NEUTRIK COMBO SOCKET CONNECTORS
COMPATIBLE WITH BOTH 6.3MM JACK PLUGS,
AND 3 PIN MALE XLR CONNECTORS
MINIMUM LOAD 4 OHMS.
OUTPUT STAGE:
HIGH POWER/HIGH CURREENT M4 SERIES 2 MODULAR MOSFET
COOLING:
TWO SPEED THERMALLY SENSED DC FAN FORCED HEAT PUMP
OUTPUT POWER:
600 WATTS INTO A 4 OHM LOAD.
(SEE NOTE AT BOTTOM OF PAGE)
CHASSIS:
1.2MM POWDER COATED BHP STEEL WITH ANODISED ALLOY FRONT
SIZE:
430 wide X 300 deep x 90 high (mm)
WEIGHT:
10.5 kilograms (approx)
WARRANTY:
TWO YEARS PARTS AND LABOUR AS DETAILED IN WARRANTY CARD
.
PLEASE ENSURE YOU FILL OUT AND RETURN YOUR WARRANTY REGISTRATION
CARD TO HELP US PROVIDE YOU WITH THE BEST POSSIBLE SERVICE.
WARNING:
THE OUTPUT POWER OF THE VP600S IS CONSERVATIVELY RATED AT 600 WATTS MINIMUM. IT SHOULD
BE NOTED THAT THE PEAK POWER AVAILABLE MAY BE WELL IN EXCESS OF 600 WATTS AND CARE SHOULD BE TAKEN
TO USE SPEAKERS WITH ADEQUATE POWER HANDLING CAPABILITY. LABSYSTEMS STRONGLY RECOMMEND THAT
THE VP600S IS USED WITH TWO SPEAKER CABINETS.
IF YOU WISH TO RACK MOUNT YOUR LABSYSTEMS VP600S; ONLY USE THE ORIGINAL LABSYSTEMS RACK MOUNT
KIT . RACK MOUNTING WITHOUT GENUINE LABSYSTEMS RACK MOUNT KIT MAY VOID YOUR WARRANTY.
PLEASE CONSULT YOUR DEALER OR LABSYSTEMS DIRECTLY IF YOU REQUIRE ANY ASSISTANCE.
TO ORDER A RACKMOUNT KIT FOR YOUR VP600S QUOTE VP600RK.
ALTHOUGH LABSYSTEMS PROVIDE A RACKMOUNT KIT FOR THE VP600S, WE ADVISE THAT BETTER METHOD OF
PROTECTION MAY BE PROVIDED BY HAVING A FLIGHT/ROAD CASE THAT IS FOAM LINED, THAT THE AMPLIFER IS
PACKED INTO FOR TRANSPORTATION. DON’T FORGET THAT THE VP600S IS A VALVE PREAMP, AND MINIMISING THE
VIBRATION OF THE CHASSIS DURING TRANSPORT WILL ENSURE A LONGER LIFE FROM YOUR VALVES, AND GENER-
ALLY ENSURE MORE RELIABLE OPERATION.
If you require any further assistance or advice on the operation or features of your VP600S, please contact LABSYSTEMS
Telephone 03) 9885 0888 03) 9772 9117 Fax 03) 9885 6056
EMAIL [email protected]