Page
8
Z-PLANE Instruction Manual
V1.0
How to connect audio
To connect ZPlane you can use Reason’s own auto-connection system, and Stim ZPlane ulant will
decide the best way to auto-wire; if you have a mono-output device (Subtractor, for example), and
you wish to add ZPlane to it, ZPlane will auto-connect the Subtractor output to the Left input, and
then continue to route the Left output of the ZPlane to the Left input of the mix-channel (or next
device in your processing chain).
You can do any of the following to create ZPlane;
a) right-click (Win) / CTRL-click (Mac) on the device, select ‘Create Device’, choose sub-menu ‘Studio
Effects’, and select ‘ZPlane Morphing Filter’ from the listing.
b) with the device selected, use the ‘Create’, select ‘Create Device’, choose sub-menu ‘Studio Effects’
and select ‘ZPlane Morphing Filter’ from the listing
c) using the Tool Palette in Reason (F8), select ‘Studio Effects’ when in the ‘Devices’ tab, and locate
the ‘ZPlane Morphing Filter’ device, click on the icon and drag it to the device you wish to add it to.