Document type:
Last modified:
Page:
Based on template: ‘
Technical Documentation.dot
’
Technical Documentation 09-01-16
Page 10 of 21
File: ‘
NLB-60E communication protocol - Revision 2 DRFT 2A.doc
5.2.2 Subnet Mute
Sets / gets subnet mute control (mutes or un-mutes all devices in the subnet)
Address
Op.
Value
0 – Un-mute subnet
1 – Mute subnet
=
Reply
Subnet.Mute
?
0 – Subnet is un-muted
1 – Subnet is muted
5.2.3 Subnet StatusOk
Gets if there are any faults in a subnet.
Address
Op.
Value
Reply
Subnet.StatusOk
?
1 – No faults present in subnet
0 – Faults are present in subnet
