Lab.gruppen IPD SERIES, Быстрый старт, Страница: 2 / 12

2
Introduction
Lab.gruppen IPD Series amplifiers provide exceptionally high power density and powerful integrated DSP features, making them suitable for a
broad range of installed and touring sound applications. All IPD Series amplifiers feature both analog and AES3 inputs with link outputs; input
mixing; comprehensive DSP functions (crossover, parametric EQ, delay and limiter control); network control via Ethernet on Cat-5 cable or using
suitable WiFi access point; IntelliDrive™ Controller software and iPad native app; comprehensive front-panel display and dedicated mute buttons;
and both binding post and Neutrik speakON output connectors.
The information contained in this Quick Start Guide is sufficient for proper installation of IPD Series amplifiers, and for configuration of settings
in typical applications. Please refer to the full Operation Manual for detailed information on maintenance, cooling requirements, warranty, and
configuration for complex installations.
Except as specifically noted, all features, values and connections are identical for the IPD 1200 and IPD 2400.
Important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
15. WARNING: To reduce the risk of fire of electric shock, do not expose
this apparatus to rain or moisture.
16. Do not expose this equipment to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
equipment.
17. Do not connect the unit’s output to any other voltage source, such
as battery, mains source, or power supply, regardless of whether the
unit is turned on or off.
18. Do not remove the top (or bottom) cover. Removal of the cover will
expose hazardous voltages. There are no user serviceable parts
inside and removal may void the warranty.
19. An experienced user shall always supervise this professional audio
equipment, especially if inexperienced adults or minors are using
the equipment.
Standard
This equipment conforms to the
requirements of the EMC Directive
2004/108/EC and the requirements of
the Low Voltage Directive 2006/95/EC.
Standards applied: EMC Emission
EN55103-1, E3
EMC Immunity EN55103-2, E3, with S/N
below 1% at normal operation level.
Electrical Safety EN60065, Class I.
This equipment is tested and listed
according to the U.S. safety standard
ANSI/ UL 60065 and Canadian safety
standard CSA C22.2 NO. 60065. UL
made the tests and they are a Nationally
Recognized Testing Laboratory (NRTL).
Explanation of graphic symbols
The lightning bolt triangle is used to
alert the user to the presence of
un-insulated “dangerous voltages”
within the unit’s chassis that may be
of sufficient magnitude to constitute a
risk of electric shock to humans.
The exclamation point triangle is used to
alert the user to presence of important
operating and service instructions in the
literature accompanying the product.
To prevent electric shock do not remove top or bottom covers. No user
serviceable parts inside. Refer servicing to qualified service personnel.
Français: à prévenir le choc électrique n’enlevez pas les couvercles.
Il n’y a pas des parties serviceable à l’intérieur. Tous reparations doit etre
faire par personnel qualifié seulment.
To completely disconnect this equipment from the AC mains,
disconnect the power supply cord plug from the ac receptacle.
The mains plug of the power supply cord shall remain readily operable.
Français: Pour démonter complètement l’équipement de l’alimentation
générale, démonter le câble d’alimentation de son réceptacle. La prise
d’alimentation restera aisément fonctionnelle.