10
CA SERIES
Quick Start Guide
11
CA Series Controls
Controls
(1)
EQ knobs
– Adjusts the bass and treble for
the master output(s).
(2)
Master volume
– Controls the overall output
level. The associated LED(s) will light green to
indicate active signal, and light red to indicate
limiting/protection.
(3)
Power button
– Turns the unit on, force it to
stand by. The LED will indicate power status.
(4)
Mains connector
– Connect the IEC cable to
a mains outlet.
(5)
Config switches
– Configure the output
channel for the connected load type. See
‘Getting Started’ section for details.
(6)
Output
– Connect your speaker(s).
(7)
Remote
– Allows the connection of an
external volume control module per channel.
CRC-V available as a separate accessory.
(8)
Euroblock input
– Accepts 3-pin Euroblock
connectors for balanced line-level sources.
For the 2-channel models, Input A is routed
to Output A only, and Input B is routed to
Output B.
(9)
RCA inputs
– Allows the connection of stereo
unbalanced sources, which will be summed
to mono and routed to the associated output
(Input A to Output A).
For the 2-channel models, stereo operation
can be achieved by connecting the left signal
to Input A and the right signal to Input B.
(1)
(3)
(2)
(4)
(5)
(6)
(7)
(8)
(9)
10
CA SERIES
Quick Start Guide
11
CA Series Controls
Controls
(1)
EQ knobs
– Adjusts the bass and treble for
the master output(s).
(2)
Master volume
– Controls the overall output
level. The associated LED(s) will light green to
indicate active signal, and light red to indicate
limiting/protection.
(3)
Power button
– Turns the unit on, force it to
stand by. The LED will indicate power status.
(4)
Mains connector
– Connect the IEC cable to
a mains outlet.
(5)
Config switches
– Configure the output
channel for the connected load type. See
‘Getting Started’ section for details.
(6)
Output
– Connect your speaker(s).
(7)
Remote
– Allows the connection of an
external volume control module per channel.
CRC-V available as a separate accessory.
(8)
Euroblock input
– Accepts 3-pin Euroblock
connectors for balanced line-level sources.
For the 2-channel models, Input A is routed
to Output A only, and Input B is routed to
Output B.
(9)
RCA inputs
– Allows the connection of stereo
unbalanced sources, which will be summed
to mono and routed to the associated output
(Input A to Output A).
For the 2-channel models, stereo operation
can be achieved by connecting the left signal
to Input A and the right signal to Input B.
(1)
(3)
(2)
(4)
(5)
(6)
(7)
(8)
(9)
