LAB12 SUONO 25W Class A Single Ended Power Amplifier
Features
• KT150 matched tubes
• Manual Bias Adjustment
• Triode / ultra linear selector switch
• Handcrafted custom audio grade transformers
• No feedback design
• High power transformer
• Special audio grade matched parts in every stage
• SRSG® implementation
• Fine symmetry® implementation
• Gold plated teflon rca connectors
• Gold plated tube sockets
• Analog retro nissei VU meters
• 5mm aluminum face panel with luxury painting
• Five years guarantee
Installation & Placement
The
LAB12 Suono
should be placed on a solid flat surface.
You should avoid placing it near a heat source as this could compromise the Suono performance and
reliability.
Carefully put the tubes in dedicated sockets. Make sure that tubes are perfectly snap in to sockets. Tube
pairs that included in box are always matched so is not important witch one you put in every channel.
Due to high power tubes design, Suono chassis could be hot so you should never place another hot
component directly near this device
. Make sure the device has enough space to ventilate.
Tubes will be hot, this is normal. Be careful not to touch the tubes during the operation to avoid any
injuries.
Take care of the finest luxury finish of front panel with a soft cloth.
