Lab12 mighty- Class A Single Ended Power Amplifier
Page
4
of
8
Features
•
EL34, 6550, KT88 compatible (EL34 from factory)
•
Triode / Ultra Linear selector switch
•
No feedback design
•
SRSG® implementation
•
Fine symmetry® implementation
•
Analog retro Nissei VU meters
•
5mm Aluminum face panel
•
Five Years Guarantee
Installation & Placement
Mighty should be placed on a solid flat surface. You should avoid placing it near a heat source as this
could compromise the mighty performance and reliability.
Insert the tubes carefully in each position. All tubes are marked with position number was placed
during calibration and burn in of mighty.
Due to high power tubes
’
design, mighty chassis could be hot so you should never place another hot
component directly near this device
. Make sure the device has enough space to ventilate.
Tubes will be hot, this is normal. Be careful not to touch the tubes during the operation to avoid any
injuries.
Take care of the finest glass blasting anodized finish of front panel with a soft cloth. No need to use any
sprays or polishes. Never use cleaners containing abrasives, as this will damage the surface.
