LAB12 DAC1
Handcrafted Digital to Analog Converter
Front Panel Indicators
DAC1 Front panel
In front panel you will see three indication LEDs and two VU meters.
The center LED (A) indicates that the device is powered on.
The LEDs (B and C) indicates that the
DAC1 Special Edition
has successfully locked onto an input signal.
To the left and right of the 3 LEDs you see two retro analog VU meters (
D
and
E
). You can accurately monitor the
output level of each channel on dB scale.
Rear Panel Connections
DAC1 Rear panel
In rear panel you will find the connection inputs and outputs.
On the left side is a pair of single-ended RCA analog audio output connectors (
A
and
B
).
In the middle of rear panel you will also find the digital inputs. You can select
RCA coaxial 75 ohm spdif
(
C
) input
or
USB2
(
E
) input with the selector switch (
D
). Both inputs can receive up to 96 Khz/24bit.
To the right side you will find an
IEC AC input
(
F
). Below IEC input is located the main fuse holder (G) and the
Power switch
(
H
).
