background image

DuraFlow Water Heater

Page 3

SECTION 1.
General Information

1A. Introduction

The DuraFlow water heater / buffer was

designed and developed specificaly as a companion

for 

modern low mass

, high efficiency heating boilers.

When piped between the supply and return it

provides a twenty gallon buffer in the hydronic

system. This is typically required in systems with

three or more zones to store and release heating

capacity when only a single zone is operating.

As a water heater, it utilizes the rapid heat-up

ability of low mass boilers to immediately convert this

energy to a steady state continuous domestic output.

In single residential applications when provided

with a properly piped mixing valve and flow restrictor

(see Figure 2) it is the hot water source with a twenty

year warranty.

1B. Piping

When the DuraFlow is utilized as a domestic

water indirect, it may be piped as a zoned indirect

utilizing conventional circulator or zone valve piping

and wired with domestic water priority. In this and

buffer applications, the DuraFlow must always be

piped with a thermally trapped tempering valve and

flow restrictor set for applicable boiler input.

When utilized as both a buffer and a domestic

water indirect, the DuraFlow is piped to the heating

system supply and return headers or as the bypass on

systems requiring primary / secondary piping. No

zone valve or circulator should be piped in series with

the DuraFlow. In most applications the boiler pump

(internal or external) serves as the flow means

between the boiler and tank when used as a buffer.

In multi-unit residential applications with a

single hydronic heating system, it serves as the heat

exchanger source for single or multi tank domestic

water storage.

When piped as a buffer and an indirect domestic

water source to a storage tank, a tempering valve and a

flow restrictor are not required.

Figure 1.  Dimensions and Connections.

*Minimum Clearance
  Dimension

Figure 2. Domestic Hot Water Piping.

STORAGE

TANK

OPTION 1

COLD

DURAFLOW

PRESSURE

RELIEF VALVE

AQUASTAT

RECOMMENDED

ANTI-SCALD VALVE

SUCH AS SPARCO

OR DANFOSS

REQUIRED

FLOW

RESTRICTOR

(SUPPLIED)

OPTIONAL RETURN LINE PIPING

OPTION 2

ALTERNATIVE APPLICATIONS

OUT OF

PRODUCTION

Содержание duraflow









Отзывы: