Laarmann LM2000, Руководство пользователя

Страница: 15 / 21

MANUAL LM2000
15
6. WORKING INSTRUCTIONS
6.1. GENERAL
The LM2000 is a high performance product. It is used mainly in the processing
minerals.
6.2 Starting the milling process
• Set the parameters as described before
• Open the lid of the machine and put in the sample on top of the puck in the bowl
• Close the machine lid and press start on the display.
The milling process can only be started, when the hood is closed, the
power is connected and when the air pressure is high enough.
Do not open the hood during the milling process, also not by force.
Do not mill inflammable or explosive samples! For these kind of
samples, please contact LAARMANN for special features.
Please note that the properties and therefore the dangerous nature of
your sample, can change during the milling process.
6.3 Stopping the milling process
•
Stop the milling operation by pressing the emergency switch.
•
Pressing stop on the display
•
When the milling time elapses, the milling process is automatically ended. The
display is reset to the last set value.
When removing and opening the bowl, always wear protective gloves.
There is a danger of burning the hands.