Programable Automatic Control
There are 4 available programs, F1 to F4. These also correspond with the physical numbers on the
machine. In this screen you can set the programs. You switch between the programs by pressing on them,
the last know settings will load.
You can set the desired time by pressing H (Hours) / M (Minutes) / S (Seconds). A number pad will appear
(see 5) and here you can give in the desired speed or rotations. You confirm it by pressing
When you have put in the desired parameters press next to go to the starting screen (see 4) and the
settings will be saved automatically. Select between (if available)
900RPM
/
1000RPM
/
1300RPM
/
1450RPM
Manual control
Before starting the machine, you need to clamp the bowl. Press the
“
Clamp bowl
”
button and the button will
change colour (green). You can press chance direction while the machine is in motion to change the
direction. To access the inside you must press Unlock the Lid to open the hood. Press
“
Start mill
”
to start the
machine.
When you stop the machine by pressing
“
Stop mill
”
you must press
“
Release Bowl
”
to be able to remove the
Bowl from the machine. Select between (if available)
900RPM
/
1000RPM
/
1300RPM
/
1450RPM
H/M/S count the passed time, these number can
’
t be adjusted If you press exit, you will go back to the start
screen. The hand control is mostly used for system checks and short milling. For operational use please use
the automatic program.
9
This is the starting screen for the installation.
Here you can select
“
Hand Controls
”
for manual input or select
“
Automatic System
”
for automatic.
If you press
“
Hand Controls
”
go to step 2.
If you press
“
Automatic System
”
go to step 3.
If you press
“
Semi Automatic System
”
go to step 4.
You can also have the controls in your own
language
. Once bought your nations flag will appear next to the
British flag and you can press it to switch languages. We have an additional option to change the
RPM
please contact LAARMANN for the options
Here you see the overview of the automatic system starting screen.
Here you will see the selected parameters and are able to start the machine for use. The machine will
automatically pressurize the bowl and start the program.
Once the programme has finished you can press
“
unlock the lid
”
and
“
release bowl
”
to open the hood and
remove the bowl inside.
5.2
Instructions for use
LM250/LM1000 PULVERISER RING MILL MANUAL
Semi Automatic Control
Semi automatic is very similar to hand control. With the semi automatic function the machine can be started
without manually clamping the bowl. This will be done automatically
Select between (if available)
900RPM
/
1000RPM
/
1300RPM
/
1450RPM
the chosen RPM will be colored in
green. It
’
s possible to change the RPM while running. Press change direction to run in the opposite
direction, the button color will turn purple if this function is active.
Press
“
Start Milling
”
to begin the program. The program will keep running until the operator presses
“
Stop
Milling
”
to stop the program.
