LaSpaziale S1 Vivaldi II Timer Instruction Manual
Page 5 of 8
OFF
If you want to disable use of the timer function to turn the S1 on and off.
ON
If you want to enable the timer to turn the S1 on and off at the programmed times, then
confirm it with the button
The display then changes to:
On the top line: Monday (flashing)
On the bottom line: ----------
With the buttons , select the day and then confirm with button . The selected day
becomes fixed and abbreviated followed by the message:
On the first line: Mon 1º ON
On the second line: 12:00am (with the first two flashing digits)
With the buttons select the hour and confirm with ..
This makes the digits corresponding to the minutes flash. With the buttons select the
minutes and confirm with . The message Mon 1º ON becomes Mon1º OFF. On the
second line: 12:00am (with the first two flashing digits)
Use the same procedure as above to select the first hour for OFF. By confirming it, the
message Mon 1º OFF becomes Mon 2º ON and, once it is confirmed, it becomes Mon 2º
OFF. The same procedure is valid for the 3rd time setting. Once the Mon 3º hour of OFF is
programmed, the display changes to:
Top line: Tuesday (blinking)
Bottom line: Copy
If you want to copy the setting made the previous day, you have to press the button and
hold for three seconds. If you wish to copy a single day’s schedule such as Mondays all the
way through Friday, for example, press again and hold the button for 3 seconds as you
cycle through each day. If you want to just move to the next day to set up a schedule different
than that just programmed, momentarily press the button. You can then program the
next and and subsequent days for up to three different On / Off times just as the Monday
example described above. After each day you can press for three seconds to copy to
the next day or momentarily press the button to move to the next day.
