25
6. Simple problem analyses
Problem
Problem analyses
Resolve method
Compressor not
working
Power not connected
Check the power
Power lead or wire damaged
Contact distributor or service agent
Fuse broken
Change fuse
Internal circuit fault
Contact distributor or service agent
Power supply off
Check if power cut
In heating process
Common phenomena. When the temperature inside
cabinet is lower than that you set, the cabinet will be
heated automatically
Compressor noisy or
frequently on or off
Power supply not stable
Switch off the power, restart 3 minutes later
Cabinet not on flat floor
Adjust front feet until perfect level
Not cold enough
Temperature set too high
Check temperature, reset it
Door open too long or too often
Only open when necessary
Door seal damaged
Contact your distributor or service agent
LED do not light
Electric circuit problem
Contact your distributor or service agent
LED damaged
Contact your distributor or service agent
Can not close door
properly
Cabinet not on level
Adjust front feet until perfect level
Door installation incorrect after
change hanging side
See Alternative hanging of door and install it
correctly
Shelf extend out of the case
Put the shelf back to right position
Setting temperature and measured temperature may be different (2 or 3°C). This is normal, the reason
can be temperature sensor position or external conditions
La Sommelière Int.
ZA Les portes de l’Océane Ouest BP 16
72 650 Saint Saturnin, France
Trouver des informations pratiques sur votre cave et la conservation du vin ainsi que de nombreux accessoires sur
notre site
www.lasommeliere.com
