Caution!
Care and cleaning
•
Before maintenance, switch off the appliance and disconnect the mains plug from the
mains socket.
•
Do not clean the appliance with metal objects, steam cleaner, ethereal oils, organic
solvents or abrasive cleansers.
•
Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.
Installation Important!
•
For electrical connection carefully, follow the instructions given in this manual.
•
Unpack the appliance and check if there are damages on it. Do not connect the
appliance if it is damaged. Report possible damages immediately to the place you bought it.
In this case retain packing.
•
It is advisable to wait at least 4 hours before connecting the appliance to allow the oil to
flow back in the compressor.
•
Adequate air circulation should be around the appliance, lacking this leads to
overheating. To achieve sufficient ventilation, follow the instructions relevant to installation.
•
Wherever possible the back of the product should not be too close to a wall to avoid
touching or catching warm parts (compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
•
The appliance must not be located close to radiators or cookers.
•
Make sure that the mains plug is accessible after the installation of the appliance.
ENERGY SAVINGS
To reduce the power consumption of your device:
•
Install it in a suitable location (see "PARTICULAR PRECAUTIONS ").
•
Keep the doors open for as short time as possible.
Ensure the optimal functioning of your device by periodically cleaning the condenser (see "
Daily use").
•
Periodically check the door seals and make sure they always close effectively. If this is
not the case, please contact your after-sales service.
Service
•
Any electrical work required to do the servicing of the appliance should be carried out by
qualified electrician or competent person.
•
This product must be serviced by an authorized Service Center, and only genuine spare
parts must be used.
This appliance is for domestic use only. The manufacturer can not be held responsible