LA VENEZIA-17 ESPRESSO MACHINE USER MANUAL
10
Programming
BUTTON FUNCTIONS
While programming, the dose buttons are used with different functions, that usually are the
following:
Out of the programming modes, the dose buttons return to its original functions:
PROGRAMMING THE DOSAGE
To program the different doses of each group, you must do it with the filterholder filled with ground
coffee each time you program a dose in order to get the most accurate programming.
With the machine on stand-by mode, press the continuous button for 5 seconds until the LCD
shows the following message as the continuous button light start to blink.
Within the following 30 seconds you have to press the button of the dose that you want to
program, so load the filterholder with ground coffee adequate to this dose and insert it on the
group. Place the cup or cups below the coffee spout. Press once the button of the dose and
wait for the coffee to fill the cup.
When the desired volume has been reached, press again the dose button and the coffee will
stop pouring. Now the dose is programmed.
You’ll be back to the programming screen on the LCD. You can program another dose
following the same steps from the “doses settings” screen, or abandon the dose programming
by pressing 3 times the “continuous” button.
The hot water doses are programmed the same way as a coffee dose.
All the doses programmed at group 1 will copy to the other groups. If you want different
programming for each group, you must program first the doses of group 1 and then the other
groups.
