background image

EN

23

Display

Operating Procedure

Description

Programming Mode

Accessing Programming Mode 

•    To  change  the  values  of  any  parameter 

the  operator  must  first  enter  into  the 

programming mode.

•              There  are  two  levels  within  the 

programming  mode  that  allow  the 

programming of specific parameters.

•    The two programming levels are as follows:

•         

Barista  Programming

  -  The  parameters 

contained  within  this  level  are  ones  the 

operator can change to affect the quality of 

the espresso.

       No password is required for access.

•  

Technical  Programming

  -  The  parameters 

contained  within  this  level  are  ones 

the  operator  can  change  to  affect  the 

performance of the espresso machine. These 

parameters are set in the factory and their 

adjustment  requires  the  intervention  of  a 

service technician La Marzocco reccomends 

that no changes are made at this level. The 

Technician Password is required for access.

1

1

2

2

Programming Mode

LaMarzocco   00:00

CB 93.8

°

C SB

“Barista” Programming Level

While the espresso machine is on, press and hold the button T3          . After approximately 5 seconds the following 

display appears.

This is the “Barista” programming level. To program the brewing amount for each button, to set the coffee boilers, the 

pre-infusion, and to enable/disable the resistance of the cup warmer if present.

To exit the programming mode, scroll to the exit menu, using the buttons T1            or T2            . Press the T3         

button to confirm the exit, or press at the same time the buttons T2 and T3.

“Technical” Programming Level

 

While the espresso machine is on, press and hold the button T3           . After approximately 10 seconds the following 

display appears.   

This is the “Technical” programming level. Enter the password and press the buttons T1        and T2           to move 

between the available parameters, press the T3 button           to confirm.  

Note: 

You must scroll to the exit menu to exit the programming mode, or press at the same time the buttons T2 and T3.

LaMarzocco 00:00

CB 93.8

°

C SB

Program

Dose

3

LaMarzocco 00:00

CB 93.8

°

C SB

Press Enter

To Exit

Enter Password

Содержание V1.0

































































Отзывы: