La Marche A36D, Инструкция по установке и эксплуатации

Страница: 11 / 45

4
Figure 1 - 39 Enclosure Bolt Pattern
2.1.1 Rack-Mounting the A36D
The A36D can be installed in most relay racks with standard EIA hole spacing. If a relay rack is needed, they
are available for purchase from La Marche. The 4D, 9E, 33, 33E, and 39 enclosures are shipped from the
factory with the necessary brackets installed for rear mounting on a relay rack
. The rack mounting bracket for
the 4D and 39 enclosures allow for mounting on a 19” or 23” rack, and the 9E, 33, and 33E enclosures allow
for mounting on a 23” rack.
Rack Mounting Procedure
Before installing the charger on the rack,
locate the conduit entrances and assure
the knockouts on the top, sides, or
bottom of the charger are accessible after
the charger is rack-mounted. To rack
mount the A36D, first mount the charger
onto the rack-mounting brackets using the
hardware supplied. Second, install the
brackets onto the rack. Provide at minimum
6in (152mm) of air space above and below to
allow for cooling.
Figure 2 – 9E Enclosure Bolt Pattern
Figure 4 – 33E Enclosure Bolt Pattern
Figure 3 – 4D Enclosure Bolt Pattern
NOTE: All dimensions are in inches. For further A36D enclosure information, see the outline drawings online at
http://www.lamarchemfg.com/info/enclosure-drawings.html
Figure 5 - 33 Enclosure Bolt Pattern