Assembly Instructions
4
8
5
6
1
4
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this
product.
ASSEMBLY
STEP 1 -
Insert M8 x 25mm bolt (A) through cone spring (8) into foot (7) and into leg (5) and fasten until
secure. Repeat process until 3x leg assemblies are complete.
STEP 2 -
Insert M8 x 25mm screw (B) through the bowl (3) and into leg assembly and fasten until secure.
STEP 3 -
Repeat process until all 3x leg assemblies are attached to the firebowl.
STEP 4 -
Place the firebowl on its feet.
STEP 5 -
Place log grate (4) into firebowl.
STEP 6 -
Attach mesh safety cover handle (1) to mesh safety cover (2) using hardware attached.
The product is now ready to use but please ensure you have read these instructions thoroughly prior to
use.
Assembly diagram
B
2
A
3
7
Note A large fire can damage or shorten
the life of the unit.
WARNING Do not leave the unit unattended
while the fire is burning.
Note Check the product for any signs of
damage or disrepair before each use.
Note Follow all local, state and national
codes when using this unit. Contact your
local fire department for information on
outdoor burning.
