Model: WT525 www.lacrossetechnology.fr
Page | 4
PROJECTION (rotate, projection arm)
Battery Power:
Press and release the
SNOOZE/ECLAIRAGE
button to show the projection
for 10 seconds.
Micro-USB Cord:
Projection is displayed constantly.
Note:
Projection will not display constantly when operating on battery
power only.
Rotate Projection:
Press the
▲+
button to rotate the projection image 90 degrees.
Press the
▲+
button again to rotate another 90 degrees.
Continue until the projected image is right side up.
Projection Arm:
The projection arm will move forward or backward
so you can project on the wall or ceiling.
USB CHARGE PORT
Charge a smart phone, camera or other devices when the clock is
plugged into a USB outlet with the Micro-USB cord.
Note:
This is a power-output charging port. It does not supply power
to the clock.
Use the Micro-USB cord to connect the clock to a USB power
outlet (not included) or your computer.
Note:
You cannot charge mobile devices when operating the clock on
battery power only.
Connect your mobile
device’s USB charging cable (not included)
to the USB charging port.
Charging times will vary.
USB Power Output: 1.0A maximum current. Charge 1.0A devices
or devices that are self-regulating.
Note:
Most USB cables included with mobile devices will work for
charging. Some USB cables sold with a mobile device, are for data
transfer only and cannot be used for charging. Make sure that the
USB cable you use will charge your mobile device.
