21
To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic
anchors.
2. Clip the transmitter onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the
desired locations to check that the outdoor temperature readings are
receivable. In event that the signal is not received, relocate the transmitter
or move slightly as this may help the signal reception.
The mounting surface can, however, affect the transmission range. If for example the unit is
attached to a piece of metal, it may then either reduce or increase the transmitting range. For
this reason, we recommend not placing the unit on any metal surfaces or in any position
where a large metal or highly polished surface is in the immediate proximity (garage doors,
double-glazing, etc.). Please ensure that the Projection alarm clock can receive the 915 MHz
signal from the outdoor transmitter at the position that you wish to situate them.
