USING THE PROJECTOR
Press the SNOOZE/LIGHT key to
turn the projector on, rotate the
projector to project the light beam on
a dark background within 1-4 meters,
the projected data (time &
temperature) will be displayed as
following:
Note:
1. Press the SNOOZE/LIGHT key
once, EL back light and the
projection last for 5 seconds,
then press the “
” key to
reverse the projected data.
2. Press the SNOOZE/LIGHT key
for 3 seconds, the projection
keeps on for 30 minutes unless
pressing the SNOOZE/LIGHT
key again, pressing “
” key
will reverse the projected data.
3. If using DC power, the projected
data will be always on. Press
SNOOZE/LIGHT key first, then
the “
” to reverse the
projected data.
4. The rotate angle of the projector
is ±90º.
5. Adjust the quality of the projected
data by using the FOCUS key.
MANUALLY SETTING THE TIME
AND DATE
If the clock does not receive the time
signal successfully, you can set the
clock manually.
1. Press “SET” key for 2 seconds
until HOUR digit flashing.
2. Press “ADJUST” key to increase
the value of the flashing digit.
3. Press “SET” key again to step
the setting items. The setting
sequence will be: Hour > Minute
> Second > 12/24Hr > Date >
Month > Year > Day language
4. Press ADJUST key to select the
day language: GB=English,
FR=French, DE=German,
ES=Spanish IT=Italian
5. Press “MODE” key to exit the
setting mode.
SETTING THE ALARM
1. In normal time display, press
“MODE” key to enter the Alarm
Time Mode.
2. Press “SET” key for 2 seconds
until the HOUR digit flashing.
3. Press “ADJUST” key to increase
the setting value.
4. Press “SET” key again to step
the setting items. The sequence
will be: Hour > Minute.
5. Press “MODE” key to exit the
setting mode.
USING THE ALARM AND SNOOZE
FUNCTION
1. Set the Alarm time as described
in the previous section.
2. Activate the Alarm by pressing
the “ADJUST” key so that the bell
icon “
” appears.
3. Activate the Snooze by pressing
the “ADJUST” key so that the
snooze icon “
Zz
” appears.
Note:
When the snooze function is
activated and the snooze button will
be pressed while alarm the alarm will
automatically start again after 4
minutes, total 4 times. The alarm
duration is 120 seconds.
BATTERY REPLACEMENT
Under battery operation, when the
low battery indicator “
” displayed,
replace with 2 new AA size batteries.
Pay attention to the battery polarity.
IMPORTANT
Make sure you read the instructions
before operating this clock. The
signal reception from German Atomic
Clock transmitter will be affected
under certain situations. We suggest
you note the following points:
1. It is recommended to let this
clock run over night time and let
the clock receive signal
automatically during midnight, if
the reception is not possible
Always place the unit away fr
interfering sources such as TV
while daytime.
2.
om
set, computer, etc.
3. Avoid placing the unit on or next
to metal plate.
4. Closed area such as airport,
basement, tower block, or factory
is not recommended.
5. Do not start reception on a
moving article such as vehicle or
train.
