WT-8005U www.lacrossetechnology.com/support
Page | 3
WWVB
SEARCH
Reset Button
If the atomic clock display appears distorted or is not
responding to buttons, use a pen or paperclip to press
RESET
one time.
This will reset the atomic clock to default settings.
WWVB Radio-controlled Time
Press the WWVB SEARCH button to search for
the WWVB time signal.
WWVB Icon will flash when searching.
For information about WWVB visit:
www.nist.gov/pml/div688/grp40/wwvb.cfm
ATOMIC SIGNAL SEARCH:
The atomic clock will search for 1 hour between midnight and 6am until
the WWVB time signal is received. After reception, the atomic clock will
only search for the atomic signal after midnight.
Specifications
Indoor
:
Temperature Range:
14.1°F to +139.9°F (-9.9ºC to +59.9ºC)
Power:
Atomic clock
2-AA, IEC, LR6 batteries (not included)
Battery Life:
Atomic clock
Up to 24 months
Dimensions:
Atomic clock:
8.9” L x 1.2” W x 7.2” H
(226.06 L x 30.48W x 182.8 H mm)
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
Always purchase the correct size and grade of battery most suitable for
intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery
installation.
Ensure the batteries are installed with correct polarity (+and -).
Remove batteries from equipment with is not to be used for an extended
period.
Remove used batteries promptly.
WWVB
Atomic Icon
