Version 3 - 12/22/2011
Page 10 of 24
WARNING
: Match display models on the 4 numeric digits, as any other characters on the
picture label are less important. If in doubt, the model number is printed on the back of the
device just below the “ONLINE SUPPORT” entry (usually on the battery cover). You need
the last 4 digits from the
www.weatherdirect.com/2511
entry as the web site does not use the
letter codes.
Non-Audio Units
After batteries are inserted in a non-audio unit, it should scroll the words “Press Gateway
Button” in the lower window of the LCD. If it does not, press and hold both the SET+ALARM
keys until you hear two beeps, then it is reset and the “Press Gateway Button” message
should scroll.
Follow the directions on both the web site and LCD display screen. You only press the
Gateway button to register a non-audio unit.
Additional tips:
•
It is OK to press the Gateway button more
than once while the progress screen
advances
, provided that you wait 30
seconds between each press.
•
When you get to the
“
Wireless Display Settings” page, do not
be overly concerned about making your initial data entry
perfect. You have about 120 seconds to save the registration.
You can always “perfect” it later.
