Setting the Calendar
•
Slide the SELECTOR BAR to the CALENDAR SET position. The main display will switch to the
year and will flash.
•
Press the YEAR/12/24/SEC button to advance to the correct year.
•
Press the MONTH/HR button to advance to the correct month.
•
Press the DATE/MIN button to advanced to the correct set date.
•
The Day display will adjust automatically. If the day displayed is not correct, check to see you
are in the correct YEAR.
•
When finished, place the SELECTOR BAR in the LOCK position.
Setting the Time Manually
•
Slide the SELECTOR BAR to the TIME SET position. The time display will flash.
•
Press the MONTH/HR button to advance to the correct hour.
•
Press the DATE/MIN button to advance to the correct minute.
•
When finished, place the SELECTOR BAR in the LOCK position.
•
When setting the time in the 12 hour mode, an AM or PM will appear on the display . AM and PM
are only visible in the 12 hour display
Using the 12 or 24 Hour Display
Press the YEAR/12/24/SEC button to toggle between the 12 or 24 hour display. AM and PM are
only visible in the 12 hour display.
Temperature Feature
Press the C/F button to select either Celsius or Fahrenheit temperature display .
To enhance the Radio Signal Reception
•
Do not place the clock too close to household appliances such as T elevisions, computers,
speakers, DVR's and Fax Machines.
•
Do not place on top of or close to metal surfaces.
•
Do not place in a metal or concrete building unless close to a window with the curtains or other
window treatment open.
•
Do not use inside of a moving vehicle.
NOTE: RADIO SIGNAL RECEPTION MAY BE BLOCKED BY
•
Mountains and valleys
•
T all buildings
•
Power plants, power lines or high voltage cables
•
Freeways and Airports
•
Construction Sites
•
Traffic Lights
•
Neon Lights
•
Bad weather between your location and the Atomic Clock in Colorado
Care of Your Clock
•
Replace the battery promptly when necessary or store the clock without a battery when not in use.
•
A soft cloth or a paper towel may be used to clean your clock. Do not use any corrosive cleanser
or chemical solutions on the clock.
•
Keep the clock clean and dry to avoid any problems.
•
Avoid putting the clock in a highly humid environment, such as poolside or in a bathroom.
•
Do not expose the clock to direct sunlight or extremely hot or cold temperatures.
PRINTED IN CHINA
MADE IN CHINA
If your product is not working properly, please send:
- the product
- a letter explaining the problem
- and $5.00 for postage and handling to:
Equity by La Crosse
Warranty Department
2817 Losey Blvd. S
La Crosse, WI 54601
Two Year Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase against defects in
material and workmanship. During this period such defects will be repaired or the product will be
replaced at Equity’s option. This warranty does not cover damage caused by misuse or negligence. ALL
IMPLIED WARRANTIES, INCLUCING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MECHANT ABILITY, ARE LIMITED IN DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF
PURCHASE. Some states do not allow limitations on how long an implied warranty lasts so the above
limitation may not apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.
