La Crosse Technology, Ltd
Page 8
NAP Feature
Occasionally a nice nap is all you need. You can preset a naptime from 5 minutes to 120
minutes. Once the naptime is programmed, a touch of the NAP button will start the nap
countdown. The default naptime is 15 minutes.
Set Nap Time:
1. Hold the NAP button for 3 seconds. NAP 15 will show.
2. Use the + or - buttons to adjust the nap time (5 minutes to 120 minutes).
3. Press NAP button to confirm and start nap count down.
Note:
During the nap count down, press any button (except SNOOZE/LIGHT) to stop the
nap count down. Selected naptime will be saved.
Note:
When nap countdown ends, NAP ‘‘00m 00’’ will flash. Alarm beeps for 2 minutes
then return to normal display or press any button to stop ringing and return to normal
display.
Alarm Clock is dim
•
Tap the SNOOZE/LIGHT button to determine if the LCD backlight is on HIGH or LOW.
•
Clock must operate on Power cord for backlight to stay on.
Alarm Clock is blank: No numbers or dashed lines
•
Check that the Power cord. Is it correctly installed and connects to an active outlet.
•
may be overpowered or underpowered. Remove batteries from alarm clock.
•
Press any button 20 times. Leave the alarm clock unpowered for 1-2 hours.
•
Power clock with Power cord only to determine if batteries were an issue.
