La Crosse Technology, Ltd
Page 3
4.
Tap the + or – buttons to change the hour for the dimmer to be low light level.
5.
Tap the DISPLAY button to select start time for dimmer to be on High light level. STOP
TIME and the hour will flash.
6.
Tap the + or – buttons to change the hour for the dimmer to be high light level.
7.
Tap the DISPLAY button to confirm and exit.
Glow Light Colors
COLOR LIGHT OPTIONS:
EVENING: The Evening Mode is a 30-minute cycle designed to simulate the setting
of the sun. Simply start the mode before bed and the light will gradually dim and shift
in color while you fall asleep.
1.
Tap the LIGHT button to toggle through the light modes. EVENING will appear on
the LCD.
2.
There are 3 ways to confirm your selection and start the light mode. Either tap
SNOOZE, double-tap the LIGHT button, or simply wait 5 seconds. The Evening
Mode will now begin.
GUIDED BREATHING: The Guided Breathing Mode will walk you through a 10-minute
deep breathing exercise. Simply inhale and exhale as the color change. To further
assist you, the LCD will also display your inhale and exhale times.
1.
Tap the LIGHT button to toggle through the light modes. BREATHING will appear
on the LCD. Use the +/- buttons to choose the glow color. Select from three
options: Energy, Warmth, or Calm.
2.
There are 3 ways to confirm your selection and start the light mode. Either tap
SNOOZE, double-tap the LIGHT button, or simply wait 5 seconds. The Guided
Breathing Mode will now begin.
Use the +/- buttons to adjust the brightness.
The breathing exercise will last a total of 10 minutes. Press the SNOOZE button at any
time to end the exercise.
COMFORT METER: In the Comfort Meter Mode, the color changes according to the
current indoor humidity level, so you can monitor the comfort of your room at a quick
glance.
1.
Tap the LIGHT button to toggle through the light modes. COMFORT will appear
on the LCD.
2.
There are 3 ways to confirm your selection and start the light mode. Either tap
SNOOZE, double-tap the LIGHT button, or simply wait 5 seconds. The Comfort
Meter Mode will now begin.
Use the +/- buttons to adjust the brightness (OFF, 1, 2, 3, 4, 5). Press the SNOOZE
button at any time to exit.
COLOR CYCLE:
When using the Color Cycle Mode, the light will gradually shift through all the glow
color options.
