La Crosse Technology, Ltd
Page 3
Power Requirements
Three “C” (LR14) Alkaline batteries power the clock
Does the Clock Have a Backlight?
No, this clock does not have a backlight.
Generally, an a/c power cord is required for products to have a backlight. This clock does
not use a/c power cord.
Manually Set Time/Date: Program Menu
The MODE/SET button will move through the program menu. The + or - button will change a
value if needed.
HOUR:
Hold the MODE/SET button for 3 seconds. The hour will flash. Press and release
the + or - button to select the correct hour. Confirm with the MODE/SET button and move to
the minutes.
MINUTES:
The minutes will flash. Press and r or - button to select the correct
minutes. Confirm with the MODE/SET button and move to the seconds.
SECONDS:
The seconds will flash. Press and r or - button to set the seconds to
zero. Confirm with the MODE/SET button and move to the next item.
YEAR:
The year will flash. Press and release the + or - button to select the correct year.
Confirm with the MODE/SET button and move to the month/day mode.
MONTH/DAY FORMAT:
The M/D (month/date) will flash. Press and r or - button to
select D/M (day/month). Confirm with the MODE/SET button and move to the month.
MONTH:
The month will flash. Press and release the + or - button to select the correct
month. Confirm with the MODE/SET button and move to the date.
DATE:
The date will flash. Press and release the + or - button to select the correct date.
Confirm with the MODE/SET button and move to DST.
Note:
The weekday will set automatically after the year month and date are set.
DAYLIGHT SAVING TIME:
DST will flash. Press and release the + or - button to select DST
ON or DST OFF. Confirm with the MODE/SET button and exit the program menu.
CHANGE TIME ZONE:
Hold the + 12/24 button for 3 seconds to move the time zone once.
Hold again to change to a different time zone.
This clock has four time zones:
E =
Eastern
, C =
Central
, M =
Mountain and
P =
Pacific
12-HOUR OR 24-HOUR TIME FORMAT:
Press and release the + 12/24 to switch
Set Time Alarm
Press and
release the MODE/SET button to enter Alarm Mode. “
AL
” will show on the display.
ALARM TIME:
Hold the MODE/SET button to enter alarm time setting mode.
HOUR: The hour will flash. Press and release the
+ or -
button to select the correct hour.
Confirm with the MODE/SET button and move to the minutes.
MINUTES: The minutes will flash. Press and release
+ or -
button to select the correct
minutes. Press and release the MODE/SET button to confirm and exit.
