La Crosse Technology
Page 3
Features
Calendar (Month/date, 2000-2099 Default Year 2012)
Time (hour/minute)
Indoor Temperature (°F/°C)
Indoor Temperature Trend
Indoor Humidity (%RH)
Wireless Outdoor Temperature (°F/°C)
Outdoor Temperature Trend
Outdoor Humidity (%RH)
Signal strength icon for outdoor sensor transmission
12/24 hour time (manual setting)
Calendar: month/day/date
Alarm and Snooze Function
Moon Phase
High/Low Temperature Alert for Indoor and Outdoor Temperature
Large 1 7/8 inch Temperature numbers
Low Battery indicator for outdoor sensor and station
MIN/MAX Daily Records with auto reset (0:00)
Setup Instructions Step-by-Step
STEP 1:
Slide the battery cover tab down and pull out to remove the battery cover from the weather station.
Insert two new AA batteries (not included) into the back of the weather station. Observe the correct
polarity (see marking inside the battery compartment).
The weather station will light up and show, indoor temperature.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
STEP 2:
Ensure that the transmitter is within 10 feet of the Weather Station.
Remove battery cover from TX141TH-A transmitter. Slide the battery cover down and lift off the front
of the transmitter.
Insert two new AA batteries into the transmitter. Observe the correct polarity.
Within three minutes the weather station will show readings in the outdoor temperature area on the
LCD.
Note:
Allow the weather station and the transmitter to stay within 10 feet of each other for the first 15
minutes of set up.
Troubleshooting
After the batteries are inserted, the weather station will search for the outdoor temperature transmitter
for 3 minutes.
The antenna symbol
will flash during reception, and temperature display will be dashes “---“.
No antenna symbol will show during RF (radio frequency) synchronization.
If synchronization fails once, the antenna will lose one bar.
If synchronization fails twice, the antenna will lose two bars.
If RF (radio frequency) reception fails five times, the antenna symbol will show:
The antenna will show full display with successful RF (radio frequency) reception.
Search for Transmitter
If the outdoor temperature is not displayed after three minutes, hold the
SENSOR button on the weather station for three seconds to search for
outdoor transmitter.
Next remove the battery cover from the TX141TH-A transmitter then press
the TX button to send a signal.
If it still does not receive the outdoor temperature, remove the batteries from both the weather station
and the transmitter for 15 minutes repeat setup instructions from step 1.
