Model: 308-1414B/308-1414W www.lacrossetechnology.com/support Page | 8
OUTDOOR HIGH
alert will flash. Press the
▼
or
▲
buttons to set the alert
value, and press the ALERT button to confirm. Then press the
ALERT
button
again switch to OUTDOOR LOW setting.
OUTDOOR LOW
alert will flash. Press the
▼
or
▲
buttons to set the alert
value, and press the ALERT button to confirm. Then press the
ALERT
button
again switch to INDOOR HIGH setting.
INDOOR HIGH
alert will flash. Press the
▼
or
▲
buttons to set the alert
value, and press the ALERT button to confirm. Then press the
ALERT
button again
switch to INDOOR LOW setting.
INDOOR LOW
alert will flash. Press the
▼
or
▲
buttons to choose the value, and
press the
ALERT
button to confirm and exit.
Note:
After selecting temperature alert values use the next step to turn individual alerts
ON or OFF.
Arm/Disarm Temperature Alerts
In normal time mode, press and release the
ALERT
button to toggle between:
o
Outdoor HI
o
Outdoor Lo
o
Indoor HI
o
Indoor LO
Press the
▲
button to
arm
the selected alert.
The alert bell appears when each alarm is activated.
Press the
▼
button to
disarm
the selected alert.
OFF will show in the Alerts area if no alert is active.
Temperature Alert Sounds
When temperature alert sounds, the corresponding alert bell will flash.
The alert beeps once every minute, until the temperature is out of alert range.
Press any button to stop alert. The alert bell will still show.
Disarm Alert
: In normal mode, hold and release the
ALERT
button to select the alert
to disarm. With HI or LO alert selected, press the
▼
button disarm alert.
Adjust Backlight (HI-LOW-OFF)
When using AC power:
Press the
HI/LOW/OFF
button
to adjust the backlight:
When using Battery power only:
Press the
HI/LOW/OFF
button
for 10 second backlight.
Time Alarm Set
Hold the
ALARM
button for 5 seconds to enter the alarm time set mode.
1.
The alarm hour digit will flash in the time display.
2.
Press and release the
▼
or
▲
buttons to select the hour.
3.
Press and release the
ALARM
button to set the minutes.
4.
The minute digits will flash.
5.
Press and release the
▼
or
▲
buttons to select the minutes.
6.
Confirm with the
ALARM
button and exit.
7.
The bell icon will show indicating the alarm is active.
8.
The bell icon will flash when the alarm is sounding.
