La Crosse Technology Technical Support, Rev. 1.1
Page 13
NOTE
: When in the 12h mode, there is only a 'PM' display, which appears under
the word TIME. During the 'AM' hours this area will be blank. When the correct
hour shows, press and release the SET button once.
MINUTES:
The Minutes will flash. Press and release the UP ARROW or DOWN
ARROW button until the correct Minutes display. Press and release the SET button
once.
12/24-HOUR TIME:
A 12h or 24h will flash. To change between 12h and 24h,
press and release the UP ARROW or DOWN ARROW button. Press and release the
SET button once.
NOTE
:
When in 24-hour time the Date will display Day first, then Month.
YEAR
: The Year will flash. Press and release the UP ARROW or DOWN ARROW
button to set the correct Year. Press and release the SET button.
MONTH:
The Month will flash. Press and release the UP ARROW or DOWN ARROW
button to set correct Month. Press and release the SET button.
DATE
: The Date will flash. Press and release the UP ARROW or DOWN ARROW
button to set the correct Date. Press and release the SET button.
FAHRENHEIT/CELSIUS
: Degrees Fahrenheit or Celsius will flash in the Wind chill,
Indoor and Outdoor temperature areas. Press and release the UP ARROW or DOWN
ARROW button to change between Fahrenheit and Celsius. Press and release the
SET button once.
WIND SPEED UNIT
: Wind Speed units will flash. Press and release the UP
ARROW or DOWN ARROW button to select from mph, m/s, knots, Beaufort, or
km/h. Press and release the SET button once.
RAIN UNIT
: Rainfall Inches or Millimeters will flash. Press and release the UP
ARROW or DOWN ARROW button to select in or mm. Press and release the SET
button once.
PRESSURE UNIT:
The Air Pressure units (inHg or hPa) will flash. Press the UP
ARROW or DOWN ARROW button to select inHg or hPa. The Default setting is inHg.
Press and release the SET button.
RELATIVE PRESSURE SETTING:
The Relative Air Pressure will flash. Press the
UP ARROW or DOWN ARROW button to adjust the Relative Air Pressure.
NOTE
: Refer to the local weather station for an appropriate setting. It is important
that this setting be adjusted for local conditions to ensure forecast accuracy. Press
and release the SET button.