Page | 11
Wireless Weather Forecast Station with Colored LCD Display
• Press the PLUS button to toggle between sensor channels when multiple sensors are used.
• After initial setup, channel 2 and channel 3 will not show unless additional sensors connected.
Channel Selection
Using Multiple Sensors
Your forecast station can read up to 3 TX141TH-BCHv3 sensors.
Add Sensors:
• Remove battery covers from all sensors.
• Set each sensor to a different channel with the switch.
• Insert batteries into all sensors.
• Hold the TEMP button on the forecast station to search for sensors.
• Press the TX button on each sensor.
• After 15 minutes place, sensors in shaded locations.
AA
AA
1 2 3
TX
CHANNEL
SWITCH
Sensor Search
• Hold the TEMP button for 3 seconds to search for the outdoor temperature/humidity sensor.
• The strength signal icon will animate until the sensor signal is received, or for 3 minutes if no signal available.
Low Battery
• Battery by Outdoor Temperature, replace batteries in the sensor.
• Battery by Indoor Temperature, replace batteries in the weather station.
Restart
When the outdoor readings show dashes:
• Bring the sensor in the house at least five feet from the forecast station.
• Remove batteries from the sensor, as well as, the batteries and AC adapter from the forecast station.
• Press any button 20 times.
• After 15 minutes insert batteries into the sensor and station and re-connect the adapter.
• Wait 15 minutes to establish a strong connection. Place sensor outside in shaded location.
