• When first powered on, the station will rotate through all 3 channels
for 3 minutes then settle on channel 1.
• Press the
PLUS
button to toggle between sensor channels when
multiple sensors are used.
• After initial setup, channel 2 and channel 3 will not show unless
additional sensors connected.
Channel Selection
Using Multiple Sensors
Your forecast station can read up to 3 TX141TH-BCH sensors.
Add Sensors:
• Remove battery covers from all sensors.
• Set each sensor to a different channel with the switch.
• Insert batteries into all sensors.
• Hold the
HEAT/DEW
button on the forecast station to search
for sensors.
• Press the
TX
button on each sensor.
• After 15 minutes place, sensors in shaded locations.
1 2 3
AA
AA
AA
AA
TX
CHANNEL
SWITCH
Page | 9 www.lacrossetechnology.com/support WW85777