www.lacrossetechnology.com/support
Page | 1
Instruction Manual
DC:
050614
Atomic Wall Clock
Get Started
Step 1:
Insert 1 fresh AA, LR6 1.5 volt ALKALINE battery
according to the polarity marked on the case.
Step 2:
Firmly press the time zone button once.
Step 3:
Position the clock on an exterior wall that faces Ft.
Collins, Colorado. During the night, your clock will
automatically set itself.
Note:
The hands will move to the 12:00, 4:00 or 8:00 position
and search for the radio signal. If the radio signal is received
the time will set. If the signal is
not
received the clock will stay
at the 12:00, 4:00 or 8:00 position and search for the WWVB
time signal on the even hours. Once the radio signal is decoded,
the hands will automatically adjust to the correct time. This
may take up to 5 nights.
Step 4:
The default time zone is Pacific Time. If the clocks sets
itself and the hours are off, hold the correct time zone
button for 5 seconds to correct.
Position Clock
Choose a location 6 feet or more from electronics such as cordless
phones, wireless gaming systems, televisions, microwaves,
routers, baby monitors, etc., which can prevent signal reception.
Position near an exterior wall that faces Ft. Collins, Colorado for
WWVB time signal reception.
The antenna is available for signal reception when the front or
back of the clock faces Colorado.
Manual
Set Tab
Battery
Compartment
1-“AA”
Alkaline
Central
Time
Pacific
Time
DST
Indicator
Eastern
Time
Mountain
Time
