background image

TROUBLESHOOTING 
 
NOTE:

 For problems not solved, please contact La Crosse Technology via e-mail or 

phone, or visit our website, www.lacrossetechnology.com

 

 

Problem: 

The time and date will not set initially. 

Solution: 

It usually takes overnight before the clock can receive the signal due to the 
interference the sun has on the WWVB signal.  Wait overnight for the signal. 

Solution: 

Computer monitors and televisions can cause interference with the signal 

reception. Please keep the clock at least six feet from electrical sources. 

Solution: 

In some areas of the US, in particular on the East and West coasts, the signal is 

very weak. It may take up to 72 hours before a good signal is received. The 
reception can be helped by placing the clock in a window facing Colorado, 
with the back towards Colorado. 

 
MAINTENANCE AND CARE INSTRUCTIONS 
 

• 

Extreme temperatures, vibration, and shock should be avoided to prevent damage 
to the unit. 

• 

Clean displays and units with a soft, damp cloth.  Do not use solvents or scouring 
agents; they may mark the displays and casings. 

• 

Do not submerge in water. 

• 

Do not subject the units to unnecessary heat or cold by placing them in the oven 
or freezer. 

• 

Opening the casings invalidates the warranty.  Do not try to repair the unit.  
Contact La Crosse Technology repairs.   

 
SPECIFICATIONS 

 
Dimensions:   
(L x W x H) 

3” x 2” x 3.5” 
(76x 50 x 89 mm) 

Battery One 

AA 

Alkaline 

Battery 

Battery life 

Approximately  1 
year 

 
 
 
 
 
 
 
 
 
 
 

 

6

Содержание WT-2171U









Отзывы: