WS8010 Atomic Alarm Clock PAGE I 4
Temperature Display Second Display
Atomic Time Signal
The station will search for the atomic time signal at 1:00,2:00,3:00,4:00,5:00
The atomic time signal icon will flash while searching.The tower icon will solid when it has
connected .
After reception,this station will only search for the atomic signal after midnight.
From normal time display,press and release the « + » button to search for the DCF time signal.
Please be sure you have selected your time zone from the list in the setting menu.When the
Atomic time signal is received ,the station will set to the time zone selected.
NOTE: All buttons will function during atomic time search.
Low Battery Icon
Low battery icon appears near date
.
Specifications :
Indoor Temperature
Temperature range
0C to 50C (32 F to 122 F)
Power
Batteries
3XAA,IEC,LR6 batteries(not included)
Battery life
Battery Life
Battery life is over 24 months when using the AC
adapter for primary power
Dimension
Dimension
39.16 x 18.62 x 2.9cm(15.42”x 7.33”x 1.14”)
LIABILITY DISCLAIMER
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild
country and/or in unauthorized grounds strongly damages the environment.
Please contact your local or/and regional authorities to retrieve the addresses of legal dumping
grounds with selective collection.
All electronic instruments must from now on be recycled. User shall take an active part in the reuse,
recycling and recovery of the electrical and electronic waste.
The unrestricted disposal of electronic waste may do harm on public health and the quality of
environment.
As stated on the gift box and labeled on the product, reading the “User manual” is highly
recommended for the benefit of the user. This product must however not be thrown in general rubbish
collection points.
The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any
consequences that occur should an inaccurate reading take place.
