WS6205 Instruction Manual
After successfully connecting with the remote sensor, the weather station can display the remote
temperature/humidity and the temperature/humidity trend (OUT)
You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
Remote sensor transmission:
When the Weather Station successfully receives signals from the wireless sensor, the temperature and
humidity of the out sensor
are displayed on the
"OUT"
column of the weather station.
The weather station can connect up to 3 channel wireless sensor registration, the use of multiple wireless
sensor, the wireless sensor channel cannot choose the same channel at the same time (a total of 1, 2, 3
channel can choose,)
Press the “-” key can switch the display of different channels of
remote
temperature and humidity. While
displaying a channel, hold the “-“ key to display each channel every 5 seconds automatically.
If the weather station failed to receive transmission from remote sensor (“-
-
”display on the LCD), press and
hold
“-” button for 3 seconds to receive transmission manually. the remote temperature will show an
animation of the RF antenna symbol
，
the Base Station will re receive the wireless signal of the
remote
sensor.
F.Y.I.:
when the wireless sensor set up different channels, the
weather
station "OUT SENSOR" also want to switch
to the same channel.
When there is no wireless sensor signal transmission on the channel, "--" will be
displayed in the channel of the
weather station
When the wireless OUT sensor has no channel selection function, the sensor defaults to channel 1.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/ OUT maximum, minimum temperature and humidity data, press the “
MEM
” button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
To reset the maximum and minimum temperature and humidity, press and hold down the “
MEM
” button
