25
1.
Set the desired language for the weekday display in LCD 2 by use of the + key.
2.
Press and release the SET key to enter the mode “Manual Time Setting”.
MANUAL TIME SETTING
In case the weather wall clock is not able to detect the DCF-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz
clock.
1.
The hour digits will start flashing on LCD1.
2.
Set the desired hours by pressing and releasing the + key followed by pressing the SET
key.
3.
Now the minute digits will start flashing.
4.
Set the desired minutes by pressing and releasing the + key . If the + key is held, the
units will increase by 5.
5.
Press and release the SET key to move to the “Year Setting”.
YEAR SETTING
The year can be selected sequentially from 2001 to 2029 and will then start over again (default
setting 2006). The 4 digits of the year will be visible on LCD2 .
1.
The year digits will start flashing on LCD2. Select the desired year by use of the + key.
2.
Press and release the SET key to switch to the “Month Setting”.
MONTH SETTING
1.
The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by
use of the + key.
2.
Press and release the SET key to move to the mode “Date Setting”.
