7
The Outdoor Thermo-hygro Sensor
•
Remote transmission of outdoor temperature and
humidity to Weather Station by 915 MHz
•
LCD alternates between temperature and humidity
readings.
•
Water-resistant casing
•
Wall mounting case
•
Mount in a sheltered location. Avoid direct rain and
sunlight
BATTERY INSTALLATION
INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AAA, Alkaline batteries. To install and replace the
batteries, please follow the steps below:
1.
Remove the cover at the back of the Weather Station.
2.
Insert batteries observing the correct polarity (see
marking).
3. Replace
compartment
cover.
INSTALL AND REPLACE BATTERIES IN THE
THERMO-HYGRO SENSOR
The Thermo-hygro Sensor uses 1 x 3.0V IEC CR2032, Lithium battery.
To install and replace the battery, please follow the steps below:
1.
Pull out the battery holder at the bottom of the sensor.
2.
Insert the battery, observing the correct polarity (see marking).
3.
Replace the battery holder on the unit.
