8
If you are seeing “NO” or dashes for any sensor readings, please try the
following steps:
1.
Hold the
SENSOR
button to search for all sensors.
The Reception Indicator will begin to animate.
2.
If after 3 minutes the sensor still isn’t connected, bring the sensor inside next
to the display and remove power from the sensor and station.
3.
Press any button on the station 20 times and leave the parts sit for a few
moments with the power off.
4.
Install a new set of alkaline batteries into the sensor, then power up your
station again.
5.
If your sensor data is still not appearing after these steps, please contact our
support staff. For additional help visit:
Search for Sensors
• The Sensor Weather Shield is designed to protect your outdoor
sensor from rain and snow.
• This shield will offer limited protection from the sun’s heat.
• Optional purchase at:
Sensor Weather Shield (not included)
Factory Restart
If your station is acting strangly, hold the
DATE
and
RAIN
buttons together to
factory restart your station.
