27
icon should then be displayed on the Weather station. If this does not
happen after 3 minutes, the batteries will need to be removed from both
units and reset from step 1.
4.
In order to ensure sufficient 868 MHz transmission, this should under
good conditions be a distance no more than 100 meters between the
final position of the Weather Station and the transmitter (see notes on
“
Mounting
” and “
868 MHz Reception
”).
5.
Once the remote temperature has been received and displayed on the
Weather station, the DCF time (radio controlled time) code reception is
automatically started. This takes typically between 3-5 minutes in good
conditions.
Note:
Daily DCF reception is done at 02:00 and 03:00 every day. If the reception at
03:00 is not successful, then at 04:00 and 05:00 and 06:00 there are other
tries, until one is successful. If the reception at 06:00 is still not successful,
then the next try takes place at 02:00 next day.
If reception is successful, the received time will override the manually set time.
(Please refer also to notes on “
DCF-77 Radio Controlled Time
” and “
Manual
Time Setting
”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. When batteries
need to be replaced, the low battery icon will appear on the LCD. To install
and replace the batteries, please follow the steps below:
