10
will monitor temperature and display
the temperature on its LCD, and the
TX3UP will monitor the temperature
of water or soil via a probe.
When setting up multiple remote
temperature sensors, it is important to
remove the batteries from all existing
units in operation, then to insert
batteries first into all the remote
temperature sensors. Second install
batteries into the indoor weather
station and do not press any buttons
for ten minutes. Transmission
problems will arise if this is not done
correctly.
To view the temperature of a different
remote temperature sensor unit, press
and release the
“CH”
button. A shift
from one number to the next should
be observed in the OUTDOOR LCD.
