15
2.
Outdoor Minimum and Maximum Temperature and Humidity
The indoor weather station automatically stores the minimum and
maximum outdoor temperature and humidity. The minimum and
maximum values are updated automatically when a new minimum
or maximum is recorded, or until manually reset.
a.
From the normal display mode, press and release the
“OUT/+”
key once to view the outdoor maximum
temperature and humidity (“MAX” will be displayed above
the outdoor temperature and humidity).
b.
Press and release the
“OUT/+”
key again to view the outdoor
minimum temperature and humidity.
c.
Press and release the
“OUT/+”
key again to return to the
normal mode (timeout of viewing minimum/maximum values
will occur if no keys are pressed for fifteen seconds).
d.
Note:
To reset the outdoor minimum and maximum
temperature and humidity, first display the values you wish to
reset (minimum or maximum). Next press and hold the
“SET”
key for at least three seconds. You will see then that
the values will reset to the current temperature and humidity
and corresponding time.
D.
Multiple Remote Temperature Sensors
The WS-8035 is able to receive signals from 3 different remote sensors.
These extra remote sensors can be purchased through the same dealer
as this unit. A TX4U will monitor the temperature and humidity, a
TX3U will monitor temperature and display the temperature on its
LCD, a TX3UP will monitor the temperature via a probe for measuring
soil or water temperatures and a TX6U will monitor the temperature
only.
Note: When setting up multiple units it is important to insert batteries
first into all the remote sensors, and in numeric sequence. Second
install batteries into the indoor weather station. Transmission
problems will arise if this is not done correctly and if the total time for
set-up exceeds 6 minutes
1.
Set Up of Multiple Units
a.
It is necessary to remove the batteries from all units currently
in operation.
b.
Remove the battery covers to all remote sensors.
c.
Place all remote sensors in a numeric sequential order.
