21
f. Follow the Detailed Set-Up Guide for programming and
operating instructions.
2.
Viewing and Operating with Multiple Remote Sensors
a. To view the temperature of a different remote sensor press and
release the
“CHANNEL”
button. A shift from one “boxed”
number to the next should be observed in the OUTDOOR
LCD.
b. The minimum and maximum temperature of the additional
remote sensor will be displayed below the current temperature
of the remote sensor in the OUTDOOR LCD.
c. To reset the minimum and maximum temperature readings
press and hold the
“RESET”
button for 5 seconds and the
records for all the remote sensor will be reset.
Each remote sensor will have its own minimum and maximum values
stored, as well as its own alarm settings for temperature. Resetting the
outdoor minimum and maximum values will reset all remote sensors’
recordings.
E. Remote Temperature Alarm
1.
Activating the alarm
From the normal mode, press and release the
“OUT”
key to toggle
between the temperature alarm and minimum/maximum values.
“ALARM” will be displayed above the remote temperature
display; this will also activate the temperature alarm.
2.
Setting the temperature alarm
a. Press and hold the
“OUT”
key for two seconds.
b. The low temperature will be flashing (32
°
F default/factory
setting).
c. Press and release the
“+”
or
“–“
key to adjust the temperature
from -22
°
F to +157
°
F (“- -” if outside this range). Any value
attained below this will sound the alarm.
d. Press and release the
“SET”
key to advance to the high
temperature alarm.
e. The high temperature setting is now flashing (86
°
F
default/factory setting).
f. Press and release the
“+”
or
“–“
key to adjust the temperature
from -22
°
F to +157
°
F (“- -” if outside this range). Any value
attained above this value will sound the alarm.
