WS 8002 Manual
and “
▼
“ buttons to select the alarm time you require and briefly press the ALARM button to set this Alarm time.
The Hour display of the Alarm time starts to flash. Use the “
▲
” and “
▼
“buttons to set the required hour. Press
ALARM button to confirm your setting
The Minute display of the Alarm time starts to flash. Use the “
▲
” and “
▼
“buttons to set the required minute. Press
ALARM button to confirm your setting and to end the setting procedure.
To activate or deactivate the daily alarms, briefly press the “ALARM” button once.
Info:
After 30 seconds without pressing any button the clock switches automatically from setting mode to Normal clock
mode.
The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
Rising alarm sound changes the frequency 4 times while the alarm signal is heard.
Automatic Snooze function:
Proceed as follows to activate the automatic Snooze function: While the alarm is sounding, press the SNOOZE
button to activate snooze function. Then Snooze function is active. The (((
●
))) icon appears on the display.
This operation moves the alarm back by 5 minutes and the alarm will restart at this time.
The Snooze function can be interrupted by pressing any button.
°C/°F temperature display:
The temperature is displayed either in °C or °F. Br iefly pressing the “
▼
“button allows you to switch between the
individual models.
Care and Maintenance:
•
Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give
inaccurate forecasts and readings.
•
Precautions shall be taken when handling the batteries. Injuries, burns, or property damage may be resulted if the
batteries are in contact with conducting materials, heat, corrosive materials or explosives. The batteries shall be
taken out from the unit before the product is to be stored for a long period of time.
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of
the recommended type.
•
When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they
may mark the LCD and casings.
•
Do not submerge the unit in water.
•
Special care shall be taken when handling a damaged LCD display. The liquid crystals can be harmful to user's
health.
•
Do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified
engineer. Opening and tampering with the unit may invalidate their guarantee.
•
Never touch the exposed electronic circuit of the device as there is a danger of electric shock should it become
exposed.
•
Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts
and readings and thereby reduce their accuracy.
Liability Disclaimer
•
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in wild country
and/or in unauthorized grounds strongly damages the environment
